RM新时代平台网址-首页

  • 液位計廠家,液位變送器廠家產品推薦
    天津壓力變送器的用途,渦街流量計現場安裝注意事項!
    信息來源: 流量變送器制造 | 2019-05-15 點擊量: 5159

       渦街流量計現場安裝注意事項!西安華恒儀表介紹:渦街流量計主要用于工業管道介質流體的流量測量,如氣體、液體、蒸氣等多種介質。

     
      Points for Attention in Installation of Vortex Flowmeter on Site!Xi'an Huaheng Instrument:Vortex Street Flowmeter is mainly used to measure the flow of medium fluids in industrial pipelines,such as gases,liquids,vapors and other media.
     
      其特點是壓力損失小,量程范圍大,精度高,在測量工況體積流量時幾乎不受流體密度、壓力、溫度、粘度等參數的影響。無可動機械零件,因此可靠性高,維護量小。儀表參數能長期穩定。
     
      Its characteristics are small pressure loss,wide range and high accuracy.It is almost independent of the parameters such as fluid density,pressure,temperature and viscosity when measuring volume flow rate under working conditions.No mechanical parts,so high reliability,small maintenance.Instrument parameters can be stable for a long time.
     
      渦街流量計采用壓電應力式傳感器,可靠性高,可在-20℃~+250℃的工作溫度范圍內工作。有模擬標準信號,也有數字脈沖信號輸出,容易與計算機等數字系統配套使用,是一種比較先進、理想的流量?jì)x表。
     
      Vortex flowmeter adopts piezoelectric stress sensor,which has high reliability and can work in the range of-20~250~C.It has analog standard signal and digital pulse signal output.It is easy to be used with computer and other digital systems.It is an advanced and ideal flow meter.
     
      渦街流量計在選擇安裝現場和儀表的安裝位置時應注意以下幾點:
     
      The following points should be paid attention to when choosing the installation site and the installation location of the instrument for vortex flowmeter:
     
      1、盡可能避開強電設備、高頻設備、強開關電源設備。儀表的供電電源盡可能與這些設備分離。
      2、避開高溫熱源和輻射源的直接影響。
      3、避開高濕熱環境和強腐蝕氣氛的影響。
      4、減小強振動(特別是管道振動)的影響。
      5、選擇安裝、布線、維修方便的場所。
     
      1.Avoid high-power equipment,high-frequency equipment and strong switching power supply equipment as far as possible.The power supply of the instrument should be separated from these devices as far as possible.
      2.Avoid the direct influence of high temperature heat source and radiation source.
      3.Avoid the influence of high humidity and heat environment and strong corrosive atmosphere.
      4.Reduce the influence of strong vibration(especially pipe vibration).
      5.Choose places where installation,wiring and maintenance are convenient.
     
      PS:天津壓力變送器的用途,渦街流量計現場安裝注意事項!
     
      PS:Application of Tianjin pressure transmitter,matters needing attention in field installation of vortex flowmeter!
    ?
    掃一掃.廠家定制電話,
    RM新时代平台网址-首页
  • RM新时代新项目-百度知道 RM新时代注册 RM新时代新项目 新时代娱乐平台网址 新时代RM|登录网址 新时代app游戏 rm新时代平台靠谱吗 RM新时代专业团队|首入球时间 rm新时代是什么时候开始的 rm新时代是什么时候开始的